|
Ozy 07-07-2005, 05:01 AM These are the stats from my bike. I just put on the Arata Full system and pc.:D http://img.photobucket.com/albums/v206/pcloros/Dyno0001.jpg http://img.photobucket.com/albums/v206/pcloros/Dyno0002.jpg ttretas 07-07-2005, 05:06 AM Man, those look good :thumbup I see you took care of that huge dip at 7000 rpm, good job. How does it feel? What's the meaning of the second graph? Is it a measure of acceleration? Ozy 07-07-2005, 05:48 AM Cheers mate. The bike goes much better , but I will be going to the track in 2 weeks so that will be the real test.:D The second 1 shows the power differnce in time ( secs) Big diff. at 4 sec, stock was 106 and with system and map 129:hyper I did give it a squirt on a up hill run on the Fwy. before I could get about 250 -260 kmh, but I got 270 out of it only 3/4 of the way up it. I backed of cause there was some cars ahead. Slickpitt 07-07-2005, 07:52 AM :worship Pimp! mar1tian 07-07-2005, 08:12 AM those are some sweet numbers, especially in the mid range. I have a set of graves slipons on mine, not sure how much I gained but I can tell midrange is a little better. ttretas 07-07-2005, 06:07 PM I still don't understand why your tuner used the seconds scale. You guide yourself by the rpm, not time. That scales gives the impression that your "new" bike does less rpm, when if fact, it just reaches them alot faster. I've ridden a stock R1 on a little bumpy H/w, I gave it full throttle in 4th gear and it started to raise the front wheel at about 200Km/h...than the tankslapper began and I had to cut off. I lost the front brakes too, had to pump them...geez! Oh, I was following the R1 owner on his brand new MV Agusta...it also goes FAST! Ozy 07-09-2005, 05:37 PM ttretas, I'm no expert and I dont why he used that chart. But to me it shows that the bike is producing more power quicker than stock. I dont know why you think the bike is running less RPM when the Blue line is on top of the red line. Anyway it just made a very quick bike , Quicker:D HighBimmin 07-10-2005, 04:38 AM Thats some power! Ozy 07-10-2005, 06:44 AM Thanks Bimm, Just 3 weeks till I can get her out on the track:D Then we'll see what she's like :lol ttretas 07-10-2005, 11:24 AM I didn't say it does less rpm. If you look to the second graph, without looking for the "x" axis scale, you might be fooled to think that. Anyway, you got it tuned, that's wat it matters :thumbup masonboy 07-12-2005, 12:34 AM cant see xO Ozy 07-12-2005, 06:01 AM cant see xO What is xO:confused: mar1tian 07-16-2005, 01:59 PM I just took my r1 off the dyno .... I got 156.4 rwhp with graves slipons, no pc. As well, I also noticed that the two welds let go on the midpipe so i have to get those welded. I'll post up the dyno sheet later. masonboy 08-02-2005, 10:55 PM http://x6e.xanga.com/5c1e5306226551192532/b1151710.jpg http://x11.xanga.com/f2313066221a31192534/b1151712.jpg here is mine | ||