Yoshimura YZF-R1 TRC-D Slip-On Exhaust [Archive] - R1Messagenet.com

: Yoshimura YZF-R1 TRC-D Slip-On Exhaust


RidersDiscount
05-11-2010, 09:06 AM
Everyone has an exhaust with one hole in the end – double it with the TRC-D slip-on exhaust from Yoshimura. Yoshimura claims that two outlet ports on the end of each muffler manage sound and power output better than just one, especially for high-performance applications like the 2009 and 2010 Yamaha YZF-R1. The mufflers themselves are based upon the proven TRC design; the only difference is the dual-outlet carbon fiber endcap. Available in your choice of stainless steel, titanium or carbon fiber sleeve.

As always, shipping is free. We don’t have these on our website (yet!) so call TJ at 866.931.6644 ext 817 to get a genuine Yoshimura exhaust shipped your way today. You can also email him – send those to FORUM at RIDERSDISCOUNT dot COM with R1 TRCD in the subject line and please be sure to specify your preferred exhaust sleeve and we’ll get back to your right away.

This will look good under the tail of any 2009 or 2010 Yamaha YZF-R1.
http://www.ridersdiscount.com/forum/yoshimura/exhaust_yoshimura_trcd_dual_titanium_slip_on_yamah a_yzf_r1_4.jpg

http://www.ridersdiscount.com/forum/yoshimura/exhaust_yoshimura_trcd_dual_titanium_slip_on_yamah a_yzf_r1_5.jpg

The dual-tip carbon fiber endcap is common on all TRC-D mufflers, regardless of what sleeve you choose.
http://www.ridersdiscount.com/forum/yoshimura/exhaust_yoshimura_trcd_dual_titanium_slip_on_yamah a_yzf_r1_3.jpg


Yoshimura’s welding has never been bad, but on the 2009 and up pipes, we’ve noticed that it looks like they’ve invested in some better equipment. The titanium sleeves on these mufflers have some of the smoothest beads we’ve yet to see. The black exhaust hanger bracket too, is a nice add-on. It’s made from aluminum and comes on the pipe as you see here. You don’t have to fuss with any mounting brackets.
http://www.ridersdiscount.com/forum/yoshimura/exhaust_yoshimura_trcd_dual_titanium_slip_on_yamah a_yzf_r1_2.jpg

If it has this badge, it’s made in the USA.
http://www.ridersdiscount.com/forum/yoshimura/exhaust_yoshimura_trcd_dual_titanium_slip_on_yamah a_yzf_r1_1.jpg

What you get in the box for the dual-muffler TRC-D slip-on.
http://www.ridersdiscount.com/forum/yoshimura/exhaust_yoshimura_trcd_dual_titanium_slip_on_yamah a_yzf_r1_6.jpg